  
 
|
Cablefree Access
- Product Overview
Cablefree
Access
Designed especially for the telecommunications market,
Cablefree Access provides a versatile answer to demands for last-mile
connections for today's high-performance networks.
Key features include:
- Outdoor use, capable of transmitting high speed
digital data
- Interfaces for all of the major telecommunications
formats
- Range exceeding 2km and up to 4km in certain
regions
- Wide beam technology overcomes building movement
problems
- Connect to G.703 E1, E2, E3, T1 and STM-1 interfaces
- IP65 environmentally protected casings
- Optional Indoor Unit (IDU) containing network interfaces,
management & power supplies
Cablefree Access systems are supplied as a pair of
full-duplex transceiver units together with optional wall-mount fixings
and indoor units containing network interfaces and power supplies.
Cablefree
Access Indoor Unit
The system has in-built alignment aids, link-test and
diagnostic functions to facilitate installation and service. Cablefree
Access incorporates numerous safety features and has been certified to
meet the eye-safety requirements of IEC825 and BS EN60825.
Cablefree
Access Technical Data
Variants:
|
Range |
A500, A1000, A2000, A4000 |
|
Interfaces |
Various - 1Mbps to 155Mbps |
Performance:
|
Range |
Systems for 500m, 1km, 2km & 4km |
|
Data rates supported
|
64kbps to 155Mbps |
|
Unfaded Bit Error Rate
|
Better than 1x10-10 at
155Mbps |
|
Fade Margin
|
>20dB to overcome fog, rain, snow or shimmer |
|
Link Availability
|
Between 99.7% and 99.999% depending on distance and
location |
Unit Specification:
|
Size |
depends on variant |
|
Weight |
depends on variant |
|
Unit Power Consumption
|
75W 24Vdc |
|
External Power Supply
|
90 - 250V ac auto-ranging, 48V dc option |
|
Operating Temperature |
-20 to 60ºC |
Optical sub-systems:
|
Operating Wavelength
|
980nm |
|
Filtering
|
Infra-red filter removes interference from daylight |
|
Beam divergence
|
Factory-preset to 0.5º or 0.25º |
|
Optical classification |
Eye-safety Class 1M to IEC825
-1 |
Alignment aids:
|
Alignment sight
|
Mechanical ‘gun-sight’ for general alignment |
|
RSSI meter |
10-step signal strength meter and audible tone |
|
FM audio |
2-way ‘voice link’ for speech and RSSI tones |
Data Formats:
|
Multi-E1 for network access |
Upgradable from 1x E1 to 4xE1 (external mux - 16x E1)
75ohm Coax or 120ohm UTP connectors |
|
High capacity single channel |
E2, E3 and STM-1 interfaces |
| |
Data Networking |
10, 100Mbps Ethernet - UTP or Fibre optic interfaces |
| |
Other formats |
Contact us for complete solutions |
Accessories & options
|
Installation |
Pan & Tilt mount, Wall, Tower, Pole & Tripod options |
|
Diagnostics |
Bit-error-rate measurement, in-built system diagnostics, remote status
monitoring |
| |
Software |
Comprehensive suite of software management tools |
For further information on the
Cablefree Access range please contact us
 
Click here to request further
product, application, distribution partners or other information about
CableFree Solutions
|
